Dino Vincent Tuminello, Sr. and Tiffany Tuminello v. Abc Insurance Company, Epic Entertainment, LLC D/B/A Epic Entertainment Amusement Park; And Keith E. Galloway

STATE OF LOUISIANA
COURT OF APPEAL, THIRD CIRCUIT

23-446

DINO VINCENT TUMINELLO, SR. AND TIFFANY TUMINELLO

VERSUS

ABC INSURANCE COMPANY; EPIC ENTERTAINMENT, LLC
D/B/A EPIC ENTERTAINMENT AMUSEMENT PARK; AND
KEITH E. GALLOWAY

**********

APPEAL FROM THE
FIFTEENTH JUDICIAL DISTRICT COURT
PARISH OF LAFAYETTE, NO. 20183255
HONORABLE MICHELLE M. BREAUX, DISTRICT JUDGE

**********

SHANNON J. GREMILLION
JUDGE

**********

Court composed of Shannon J. Gremillion, Candyce G. Perret, and Gary J. Ortego,
Judges.

AFFIRMED IN PART;
REVERSED IN PART.

Blake R. David
Reed K. Ellis
Robert B. Brahan, Jr.
Broussard & David
P.O. Box 3524
Lafayette, LA 70502-3524
(337) 233-2323
COUNSEL FOR PLAINTIFFS/APPELLANTS:
Dino Vincent Tuminello, Sr.
Tiffany Tuminello

Robert D. Felder
James H. Domengeaux, Jr.
Jami L. Ishee
Davidson, Meaux, Sonnier, McElligot, Fontenot, Gideon & Edwards, LLP
810 South Buchanan Street
Lafayette, LA 70502-2908
(337) 237-1660
COUNSEL FOR DEFENDANTS/APPELLEES:
Neveplast USA, LC
Nautilus Insurance Company

Scott C. Barney
Keith C. Armstrong
Joseph R. Dronet
Chaffe, McCall, L.L.P.
8550 United Plaza Boulevard, Suite 103
Baton Rouge, LA 70809
(225) 922-4300
COUNSEL FOR DEFENDANT/APPELLEE:
PERI Formworks Systems, Inc.

Jessica Duhoffman
Miles & Stockbridge, P.C.
1001 G Street NW, Suite 1100
Washington, DC 20001
(202) 655-4163
COUNSEL FOR DEFENDANT/APPELLEE:
PERI Formworks Systems, Inc.

Gregory T. Stevens
Kevin W. Welsh
Jordan P. Zeringue
Phelps Dunbar, LLP
II City Plaza/400 Convention
Baton Rouge, LA 70802
(225) 346-0285
COUNSEL FOR DEFENDANT/APPELLEE:
BigAirBag, BV
Steven W. Geiger
Emily E. Eagan
Geiger, Laborde & Laperouse
701 Poydras Street Suite 4800
New Orleans, LA 70139
(504) 561-0400
COUNSEL FOR DEFENDANT:
Neveplast SRL

GREMILLION, Judge.

Plaintiffs, Dino and Tiffany Tuminello, appeal the trial court’s grant of

summary judgment in favor of the Defendants, Neveplast USA, LC and PERI

Formwork Systems, Inc. For the following reasons, we affirm in part and reverse in

part.

FACTUAL AND PROCEDURAL BACKGROUND

The Tuminellos filed suit against Epic Entertainment, LLC and its owner,

Keith Galloway, in May 2018, alleging Dino suffered significant injuries in early

November 2017, at Epic Entertainment Amusement Park in Scott, Louisiana after

Dino landed on his head on a large air bag as he exited the “Thunder Roll” slide at

the Epic amusement park. The “Thunder Roll” was named by Galloway but is a

standard model “TUBBY Jump” offered for sale by Neveplast USA; the slide

components are manufactured by the Italian company, Neveplast SRL. The slide is

about forty feet high and consists of scaffolding provided by PERI upon which

Neveplast’s artificial snow slide materials are placed. A rider sits on an inner tube

as he descends the slide, exits the “kicker,” and lands on an airbag.

The Tuminellos alleged claims under the Louisiana Products Liability Act,

La.R.S. 9:2800.51 et seq. and general negligence claims. The Tuminellos filed six

supplemental and amending petitions adding various defendants. Extensive

pleadings were filed by the parties over the years leading up to the hearing on the

exceptions and motions for summary judgment.

Neveplast USA’s May 2020 motion for summary judgment had ten exhibits

attached to it: Neveplast Rules and Regulations for TUBBY Tracks/TUBBY Jump

Slides; BigAirBag Manual; waivers executed by Plaintiffs; the deposition of Ryan

Locher; the deposition of Keith Galloway; the deposition of Andrew Mullins;

excerpts from the deposition of Dino Tuminello; excerpts from the deposition of

Tiffany Tuminello; cell phone video of the Tuminello accident; and, Plaintiffs’

petition, as amended. Neveplast USA argued that there was no genuine issue of fact

that Epic used Neveplast materials directly contrary to its protocols, procedures,

warnings, and training, including those relating to rules about moisture, testing, and

the requirement that the slide be shut down when wet.

The Tuminellos filed an opposition to Neveplast USA’s motion for summary

judgment in July 2020, arguing that Neveplast USA’s claim that the slide was wet

was not supported by any evidence. The Tuminellos claimed that the only evidence

presented was that the airbag had water droplets bouncing off of it; it was humid the

evening of the accident but did not rain. The affidavit of William Avery, a ride

expert, was attached. Avery determined that Neveplast USA knew or should have

known of the danger that riders would rotate backwards and flip upside down, that

it failed to warn users of said event, and that its manuals and paperwork were devoid

of any instruction regarding this issue.

In December 2022, Neveplast USA filed a peremptory exception of no cause

of action as to the Tuminellos’ claim of solidary liability, arguing Louisiana only

uses a comparative fault system, even under LPLA claims. Neveplast USA also

filed a peremptory exception of no cause of action and no right of action, and

alternative motion for partial summary judgment as to improper simultaneous claims,

urging that negligence and products liability claims cannot be cumulated and

requesting partial summary judgment on the general negligence claims asserted by

the Tuminellos. Neveplast USA also filed individual motions for partial summary

judgment dismissing the Tuminellos claims under La.R.S. 9:2800.55, La.R.S.

9:2800.56, La.R.S. 9:2800.57, and La.R.S. 9:2800.58

2

On December 28, 2022, PERI filed a motion for summary judgment arguing

that it had no involvement in the design, manufacture, supply, installation, training,

or operation of the attraction, the kicker ramp, or airbag that allegedly caused Dino’s

injuries. It further argued that the scaffolding PERI provided was not the cause of

Dino’s injuries and was not alleged to be unreasonably dangerous or defective in any

way.

On January 17, 2023, Plaintiffs filed an opposition to Neveplast USA’s

motion for summary judgment arguing that their LPLA and negligence claims could

co-exist and, alternatively, if the court ruled that Neveplast USA was not a

manufacturer, genuine issues of material facts precluded summary judgment as to

its negligence. They attached the expert affidavit of Edward M. Pribonic finding

that Neveplast failed to provide Epic with proper maintenance instructions, that

Neveplast did not comply with ASTM standards by testing the slide prior to its sale

to Epic or during the installation, that the Neveplast airbag provided a defectively

designed and constructed inflatable amusement device, the Neveplast airbag did not

undergo a device analysis or risk assessment, design defects in the airbag contributed

to Dino’s injuries, and the airbag was unreasonably dangerous and defective. They

also attached the affidavit of William Avery finding that Neveplast knew or should

have known of the danger that riders would slide to rotate backwards and flip upside

down; Neveplast failed to properly warn users of the danger; Neveplast’s manuals,

training and warnings were silent on the danger of over-rotation; and, Neveplast

failed to properly warn of the danger of landing in the head-first position.1

1
Avery’s report does not distinguish between Neveplast USA and Neveplast SRL using
only “Neveplast.”

3

Following a March 27, 2023 hearing, the trial court signed a judgment on

April 12, 2023, that granted motions for partial summary judgment filed by

Neveplast USA and dismissed Plaintiffs’ claims under all four prongs of the LPLA.

The trial court sustained Neveplast USA’s peremptory exception of no cause of

action and no right of action as to improper simultaneous claims and dismissed all

remaining claims, including general negligence claims, and granted PERI’s motions

for summary judgment.

The Tuminellos timely appealed and assign as error:

1. The trial court legally erred when granting the peremptory
exception of no cause of action for Plaintiffs’ general negligence claim
against Neveplast USA.

2. Alternatively, the trial court legally erred by summarily
dismissing Plaintiffs’ claims pursuant to the LPLA Act pending against
Neveplast USA and Peri when abundant genuine issues of material
facts [sic] exists.

DISCUSSION

The depositions of Ryan Locher and Andrew Mullins were attached in support

of the motions for summary judgment.

Ryan Locher

Ryan Locher testified that he is the sole U.S. representative for Neveplast. He

created Neveplast USA, LC in 2005, after the ski resort he worked at asked him

about getting a Neveplast slide installed. He said there are approximately 300

Neveplast slides in the United States ranging from ski areas, the Smithsonian Zoo,

and smaller amusement parks like Epic. He said some locations have 80 feet of

Neveplast material while others have 2200 feet of material. Nearly 90 percent of the

slides are installed on natural terrain like hills. Locher said Neveplast sells “an

artificial snow surface” consisting of the plastic product that resembles snow, the

4

tubes, the sliding agent, and the kicker ramp. Locher testified to the mechanics of a

Tubby Jump slide installation.

Q. Is part of what you sell the design of the various jumps?

A. We provide a template. Our template is standard for the
TUBBY Jump and the skiing side of things. It’s a standard template
that we have not changed. It’s been the same template from the
beginning that we provide to our clients, and from there, you know,
they--or we don’t get involved in the structure piece of things. We out-
-they usually--you know, such as in Keith Galloway’s situation, you
know, we gave him some people that we’ve worked across in Europe,
as well as in the United States, that we’ve used in the past for
scaffolding. Peri and Layar were two of the examples that we gave
him, and, you know, we don’t get involved from that aspect on.

Q. Are you all ever asked to be involved in that aspect of it?

A. I would say so, but we never have, never will. It’s just not our
business. We sell the plastic product, what we slide on, and the
structure piece we always give to--you know, for them--give them
information that they can run with and they take it from there.

Q. Okay. And what about the tubes? You sell those?

A. Tubes we make. We make tubes, yeah, the whole structure of
the tubes. . . .

Neveplast USA also provides the sliding agents. Locher further testified:

Q. And what about the kicker ramp?

A. We manufacturer [sic] that as well. It comes out of our home
office in Italy. Everything. All the material comes out of our home
office in Italy.

Q. And the same sort of question about the kicker ramp. You all
offer just one or are there--

A. Just one.

Q. Okay. And what’s unique about that kicker ramp? Why do
you all manufacture that part but not the rest of the stretcher?

A. Just because we--you know, between the testing that
Neveplast SRL has done in the past, they know the exact, you know,
what it needs to be to--you know, that template that we give, that’s kind

5

of [a] complete--not a complete package, but it’s a --something they’ve
tested and know that that works for them.

Locher described the TUBBY Jump (the model of the slide named “Thunder

Roll” by Galloway) as consisting of:

side rails, a left and right side rail. You have bands that go across that
hold it horizontally together. So everything is pre-drilled. It’s nuts and
bolts. And that’s basically it. On top of that, you have plastic on the
side rails. You have protective padding on each side rail that in case
somebody puts their leg down or whatnot, they’re not getting--you
know, they’re not touching the plastic. Then we sell the Np 30, which
is the plastic that you’re sliding on. That is the same process, same
standard material from any straight lane that we would sell.

....

The kicker is the same concept kicker that they developed. That
hasn’t changed. You know, it’s all steel structure that has kind of
structural bands that go across that support our material and that’s just,
you know, steel. That’s basically it.

Locher said the kicker is part of the TUBBY Jump slide assembly. The air

bag is not, but the ride requires an airbag. While there are other airbag

manufacturers, Neveplast has partnered with BigAirBag and used them exclusively.

Locher said each location has different needs and once a location provides

their inclination, the Neveplast R&D team in Italy makes the CAD file, the top view

and side view of the template. Locher said: “If it’s too steep, if they need any grade

work, you know, we’ll give them our recommendation to make a safe--you know, a

recommendation to make a safe kind of operation that we feel is what we would

recommend.” He said if they are using scaffolding, rather than natural terrain, “[I]t

makes it pretty simple because they can build right to the specs of that template, the

scaffolding people or the structural engineers.”

Locher did testify when questioned about another slide built in Florida:

Q. The slide that was built in Lafayette, was it modified in any
way from the one in Florida?

6

A. It shouldn’t have been.

....

A. No, it should have been the standard, same design, same
template that we give to anybody.

Q. So all angles would be the same?

A. Yes.

Q. All the measurements?

A. That’s correct.

Q. Same height, same length?

A. That’s correct.

Q. And you would use the same kicker ramp?

A. That’s correct.

Locher said the TUBBY Jump has been installed all over the world on either

steel, scaffolding, wood, or natural terrain such as a hill. He said grade work will

sometimes be done if the slope needs to be adjusted. Locher testified that the

Thunder Roll was the standard-sized TUBBY Jump, and he described his installation

process:

You know, my process when I go to do an installation is, you know, I
make sure the installation is done correctly from start to finish. I
usually put my hands on every piece of panel that goes onto the product
or onto the scaffolding, depending where the location is. Once the
installation is completely finished, I am the first person to test it or one
of my employees will be the first person to test it.

I was the first person to test every single slide at Epic.
Everything was operating in a safe manner. And after that, I usually
meet with Keith Galloway and his team or whoever the client is and go
through all instructional and safety points related to maintenance, you
know, wind, moisture, anything that could possibly happen an hour
after I leave or a day after I leave, and hopefully he applies, you know
that information to his operation in the future.

7

Locher said, “it wasn’t rocket science,” and “I landed where I needed to land.

And, you know, within that you get variance in different weight sizes and, you know,

from middle of day to evening, and everything seemed to be operating, you know,

as should be.”

Locher said he did not have any contact with PERI. He also stated that when

he arrived at the Epic location, he did not do any kind of inspection of the structure

to make sure it was built as it was designed or that the angles were correct according

to the Neveplast SRL template. He installed the Neveplast product and that was it.

He said he did not see any “red flags” that made him think anything was different.

Locher was later asked:

Q. What I’m trying to understand is if the slide--is the slide
always a certain height?

A. It depends on the operation you’re looking for. It’s a TUBBY
Jump, it should be the exact height, but we have straight lanes that land
on the ground that could be a hundred feet, 300 feet, 200 feet, 800 feet.
It really depends on what they’re working for. Most of the scaffolding
stuff is 250 feet or less just because it’s such a massive structure if it
goes any higher than that.

Q. And the 3D image that was provided by Peri or forwarded to
you prepared by Peri, that matched the length of--

A. I couldn’t tell. There was no lengths or measurements on that
3D imaging. There was just a screenshot of a--I believe I’ve seen that
screenshot in some of the documents. But from my eye looking at it
from just from the natural eye, it looked very similar to what we
provided for the template, but I couldn’t tell from a measurement side
or length side if it matched our template.

Regarding differences in the as-built slide from the slide in the Neveplast SRL

template, Locher testified:

Q. Okay. And tell me one more time, what was different about
the on-site construction versus what’s depicted in the Neveplast
drawings?

8

A. Just it’s not the same angles. It’s an--it’s not a smooth
inclination down. There’s an inclination like this and then it flattens.
It does this and then into a transition and then up.

Q. Okay. Was it the abruptness of the transition--of the change
in angles that was at variance from the Neveplast drawings or was it the
slope or was it both?

A. Both.

Q. Okay. Was the slope greater than depicted in the Neveplast
drawings or less?

A. I think it’s less.

Q. So it was more flat, more level?

A. Yeah, I mean, ours goes all the way down. This went--
(Gesturing).

Q. I see. Okay. And I asked you earlier. Perhaps I lost the answer.
Was Peri’s scaffolding material, to your knowledge, underneath the
part where it didn’t match the Neveplast design?

A. My understanding and my belief, it was Peri’s scaffolding
material.

Q. And what makes you believe that?

A. It was--Peri’s scaffolding material was the only scaffolding
material there, from my knowledge.

Q. Okay. Are you aware of some timber construction that was
under a portion of the slide?

A. I think there was some timber construction right in the last
foot or so into the transition into the asphalt just because they left a gap
of, you know, eight to twelve inches there and that need--you can’t have
that drop, so I made them make a smooth transition from the end of Peri
onto natural terrain or natural to the asphalt.

Q. This area at the last 15 feet where the transition and slope was
not consistent with the Neveplast drawings, did you try to have the
contractor adjust the area?

A. I did make a note saying to Keith, and we had a conversation,
that it’s not to the specs of our template. But there was--at that point,
there was no changing it. You know, within testing, everything tested

9

fine, so there was no reason for me to think, you know, of something
needed to be changed.

....

Q. Okay, Did Neveplast Italy have any concerns about the actual
on-site construction not meeting the design?

A. No, no, I mean, they--as long as everything was, you know,
from our testing standpoint. When I tested, everything seemed to be
fine in the multiple times we tested it and there was no concern per se
of--in my opinion there would be no concern of making the slide faster.
It at all, it lessened the inclination and lengthened it by a little bit. It
would possibly slow it down, but we never saw anything, any reason to
believe at that time that it would make a difference in the slide.

Locher testified that he did not even notice any difference in the as-built

design from the Neveplast template until his Italian associate noted a slight

difference after being texted a picture of the completed slide by Locher. Locher

specifically stated that he tested the slide after installing his product on top of the

scaffolding and found no issues of any kind relating to the slide.

Andrew Mullins

Mullins was an outdoor shift leader at the time of the incident but has no

recollection of the particular day. He said he often worked at the top of the slide

instructing riders on what to do and not to do and having them give a thumbs up for

the camera if they agreed. Mullins said that riders were not supposed to flip or rotate

at all, but it did happen from time to time; sometimes they spun in the air, sometimes

they lost control of their tubes on purpose or on accident. Mullins estimated that

about 40 percent of the people landed with their feet up, backs straight, and holding

on to the tube as one is supposed to. Mullins did not recall anyone missing the airbag,

hitting the airbag and rolling off, or any other serious injuries. He said the worst

injuries he saw were a bloody nose or a rider being jarred from the landing, and that

was rare.

10

Mullins testified that in the summer months, the slide was too slow, and riders

would land too short or not get high enough; he said there was never a problem with

people going too far and too high. Mullins said that a water misting machine would

be used when it was extremely hot and the slide was not functioning well. In the

wintertime, the slide sped up. Mullins said the park would remain open if it was just

a light rain and riders were able to ride the Thunder Roll. He estimated that a sudden

change in weather pattern, such as dry to wet, would make a four-to-five-foot

difference in the landing area of the airbag. Having ridden the slide hundreds of

times, Mullins said there was no impact to the body whether you landed in the middle

or closer to one end of the airbag. He explained how the kicker was adjusted but

said it had only been done a handful of times. He indicated that a two-by-four would

be wedged underneath to make it easier to adjust, similar to a car jack. Mullins

reviewed the video and noted that it did not appear that the misters were on, and he

saw water jump off the airbag, “meaning it was a little slick out there.”

Assignment of Error One

In this assignment of error, the Tuminellos argue that the trial court erred in

dismissing its general negligence claims against Neveplast USA as an alternative to

their LPLA claims. Plaintiffs further claim that “no LPLA claims even existed

against Neveplast USA when the negligence claim was dismissed” because Plaintiffs’

LPLA claims were dismissed before the exception was even heard.

On appeal, we review the trial court’s grant of an exception of no cause of

action using the de novo standard of review. ERA Helicopters, LLC v. Amegin, 15-

753 (La.App. 3 Cir. 12/9/15), 181 So.3d 241.

The purpose of the peremptory exception of no cause of action is
to determine the sufficiency in law of the petition. The burden of
showing that the plaintiff has stated no cause of action is upon the

11

exceptor. The public policy behind the burden is to afford the party his
day in court to present his evidence. Jarrell v. Carter, 577 So.2d 120
(La.App. 1 Cir.), writ denied, 582 So.2d 1311 (La.1991). The exception
is triable on the face of the papers, and for the purpose of determining
the issues raised by the exception, the court must presume that all well-
pleaded facts in the petition are true. All reasonable inferences are made
in favor of the nonmoving party in determining whether the law affords
any remedy to the plaintiff. LA.CODE CIV.P. arts. 927, 931; Mayer v.
Valentine Sugars, Inc., 444 So.2d 618 (La.1984). . . .

Generally, under La.Code Civ.P. art. 931 parties may introduce
no evidence to support or controvert the exception. See, e.g., Treasure
Chest Casino, L.L.C. v. Parish of Jefferson, 96-1010 (La.App. 1 Cir.
3/27/97), 691 So.2d 751, 754, writ denied, 97-1066 (La. 6/13/97), 695
So.2d 982.

....

An exception of no cause of action is likely to be granted only in
the unusual case in which the plaintiff includes allegations that show
on the face of the petition that there is some insurmountable bar to relief.
Thus, dismissal is justified only when the allegations of the petition
itself clearly show that the plaintiff does not have a cause of action, or
when its allegations show the existence of an affirmative defense that
appears clearly on the face of the pleadings. [City of New Orleans v.]
Board of Comm’rs of Orleans Levee Dist., 640 So.2d [237] at 237 [ (La.
1994) ]. A court appropriately sustains the peremptory exception of no
cause of action only when, conceding the correctness of the well-
pleaded facts, the plaintiff has not stated a claim for which he can
receive legal remedy under the applicable substantive law.

City of New Orleans v. Bd. of Dir. of La. State Museum, 98-1170, pp. 9-10 (La.

3/2/99), 739 So.2d 748, 755–56.

The legislature set forth its intention to limit causes of actions against

manufacturers to the theories of liability found in La.R.S. 9:2800.55 et seq. when it

stated in La.R.S. 9:2800.52 (emphasis added):

This Chapter establishes the exclusive theories of liability for
manufacturers for damage caused by their products. A claimant may
not recover from a manufacturer for damage caused by a product on
the basis of any theory of liability that is not set forth in this Chapter.
Conduct or circumstances that result in liability under this Chapter are
“fault” within the meaning of Civil Code Article 2315. This Chapter
does not apply to the rights of an employee or his personal
representatives, dependents or relations against a manufacturer who is

12

the employee’s employer or against any principal or any officer,
director, stockholder, partner or employee of such manufacturer or
principal as limited by R.S. 23:1032, or to the rights of a claimant
against the following, unless they assume the status of a manufacturer
as defined in R.S. 9:2800.53(1)[.]

Is Neveplast USA a manufacturer?

A threshold question in a products liability case is whether a party is a

“manufacturer” under the statute. While this issue was raised at the hearings by the

Plaintiffs, the trial court did not make a specific finding about Neveplast USA’s

status as a manufacturer. The Tuminellos note that Neveplast USA calls itself a

“distributor for the European manufacturer of the artificial snow material that lines

the top of the Thunder Roll.” Plaintiffs argue that there is a genuine issue of fact if

Neveplast USA is an alter ego of Neveplast SRL, an undisputed alien manufacturer,

such that the LPLA would even apply to it, and if it does not, they could the pursue

the negligence avenue of recovery. The Tuminellos argue in their reply brief, “As

there is a genuine issue of material facts [sic] as to whether Neveplast USA is merely

the distributor of the subject artificial snow material, the LPLA cannot be the

exclusive remedy of Plaintiffs for their general negligence claims and the trial

court’s judgment should be reversed.” We disagree. If the legislature intended for

a plaintiff to have alternating theories of liability, it would not have made the LPLA

the exclusive remedy for claims against manufacturers. All six of the Tuminellos’

petitions allege claims falling squarely within the LPLA. In the first supplemental

and amending petition Neveplast USA is added as a defendant and described as:

E. NEVEPLAST USA, LC, a foreign corporation whose principal
place of business is located in the State of Virginia – who at all times
pertinent hereto manufactured, assembled, designed, planned, selected
and/or created the inner-tube and landing pad for this particular slide
system.

13

In their fourth supplemental and amending petition it added paragraph 11,

which stated:

11.

In addition to its role as manufacturer, defendant NEVEPLAST USA,
LC, through its own fault and/or negligence, caused the above
described injury in the following non-exclusive particulars:

The petition then lists four claims that Neveplast USA failed to properly

instruct Epic and/or its employees.

Neveplast USA is a manufacturer within the plain meaning of the statute.

La.R.S. 9:2800.53 (emphasis added) defines a manufacturer as:

(1) “Manufacturer” means a person or entity who is in the
business of manufacturing a product for placement into trade or
commerce. “Manufacturing a product” means producing, making,
fabricating, constructing, designing, remanufacturing, reconditioning
or refurbishing a product. “Manufacturer” also means:

(a) A person or entity who labels a product as his own or who
otherwise holds himself out to be the manufacturer of the product.

(b) A seller of a product who exercises control over or influences
a characteristic of the design, construction or quality of the product that
causes damage.

(c) A manufacturer of a product who incorporates into the
product a component or part manufactured by another manufacturer.

(d) A seller of a product of an alien manufacturer if the seller is
in the business of importing or distributing the product for resale and
the seller is the alter ego of the alien manufacturer. The court shall take
into consideration the following in determining whether the seller is the
alien manufacturers alter ego: whether the seller is affiliated with the
alien manufacturer by way of common ownership or control; whether
the seller assumes or administers product warranty obligations of the
alien manufacturer; whether the seller prepares or modifies the product
for distribution; or any other relevant evidence. A “product of an alien
manufacturer” is a product that is manufactured outside the United
States by a manufacturer who is a citizen of another country or who is
organized under the laws of another country.

14

Plaintiffs have admitted Neveplast USA is a manufacturer. It is the sole U.S.

distributor of the Italian Neveplast SRL artificial snow products. Under La.R.S.

9:2800.53(1)(d), Neveplast USA is a manufacturer within the meaning of the LPLA.

Thus, as a manufacturer, claims against it can only lie under the LPLA according to

the plain meaning of the statute.

The Tuminellos rely on Lavergne v. America’s Pizza Co., LLC, 02-889

(La.App. 3 Cir. 2/5/03), 838 So.2d 845, asserting that a distinction exists between

damages caused by a product from damages caused by an employee’s negligent use

of a product. In Lavergne, a three-year-old was burned after a Pizza Hut employee

placed a hot cup of tomato dipping sauce in front of him, which he then grabbed and

spilled, causing second-degree burns. The Plaintiffs argued that the negligent

placement of the heated sauce was the cause of injuries, not a defect in the sauce

itself. A panel of this court held:

Here, America’s Pizza wears two hats; one as the supposed
manufacturer of the sauce, and another as an employer of a potentially
negligent employee. While the LPLA’s exclusivity provision
eliminates a general negligence cause of action for damages caused by
a product, it does not eliminate the liability of a manufacturer for
damages caused by the negligent use of its product by one of its
employees. Thus, America’s Pizza cannot escape its liability for the
negligence of its employee by claiming to be the manufacturer of the
sauce, even if it was, in fact, the manufacturer. This is a simple
negligence claim, not one under the LPLA. We agree with the trial
court’s disposition of this issue.

Id. at 848 (emphasis added) (footnote omitted).

Notably, the appellate court affirmed the trial court’s ruling dismissing the

plaintiff’s claims under the LPLA and awarding the plaintiff damages under a

general negligence claim, which supports the exclusivity of the LPLA. The

Tuminellos have not asserted any facts indicating that Neveplast USA’s owner-

employee, Ryan Locher, negligently used the product it distributed which resulted

15

in Dino’s injuries. Locher installed the artificial snow planks some six months prior

to the date of this accident and had not returned to the location since. The facts in

Lavergne are clearly distinguishable from those before us. All of the Tuminellos’

allegations fall under the four categories for which an LPLA claim has been

exclusively established by the legislature. Moreover, the Tuminellos’ brief falls

short of alleging any facts that remove Neveplast USA from the ambit of the LPLA.

Even in their reply brief, the Tuminellos’ argument sets forth nothing that would

subvert the LPLA:

Ryan Locher put his hands on every single panel and oversaw the entire
installation of the slide. He was also aware of the slide’s deviations
from the original design, and he personally approved those deviations.
Locher even tested the slide himself and certified it as safe. He also
sold lubricant multiple times to the slide owner after installation to
make it faster. Meanwhile, both Plaintiff’s experts and Peri argued that
the variations in height and scope caused Mr. Tuminello’s injuries.
Plaintiff’s experts opined that the slide’s slope, height, and kicker angle
were causes of Mr. Tuminello’s injuries, and Peri vehemently argued
that the kicker ramp was the sole cause of these injuries. At the very
least, abundant evidence of Neveplast USA and its employees[’]
negligence exists.

Accepting all of these allegations as true and as further discussed below,

Neveplast USA was the final product manufacturer of the slide, and the Tuminellos’

various theories of liability fall under the LPLA. The trial court did not err in

granting Neveplast’s no cause of action. Accordingly, this assignment of error is

without merit.

Assignment of Error Two

In this assignment of error, the Tuminellos argue that the trial court erred in

granting summary judgment in favor of Neveplast USA and PERI under the LPLA.

The law pertaining to summary judgment was discussed by the
Louisiana Supreme Court in its per curiam opinion in Hines v. Garrett,
04-806, p. 1 (La. 6/25/04), 876 So.2d 764, 765 (alteration in original):

16

We review a district court’s grant of summary
judgment de novo, viewing the record and all reasonable
inferences that may be drawn from it in the light most
favorable to the non-movant. Summary judgment is
warranted only if “there is no genuine issue as to material
fact and [ ] the mover is entitled to judgment as a matter of
law.” La.Code Civ.Proc. art. 966(C)(1). In ruling on a
motion for summary judgment, the judge’s role is not to
evaluate the weight of the evidence or to determine the
truth of the matter, but instead to determine whether there
is a genuine issue of triable fact. All doubts should be
resolved in the non-moving party’s favor.

“[F]acts are material if they potentially insure or preclude recovery,
affect a litigant’s ultimate success, or determine the outcome of the
legal dispute.” Smith v. Our Lady of the Lake Hosp., Inc., 93-2512,
p.27 (La. 7/5/94), 639 So.2d 730, 751, (quoting South Louisiana Bank
v. Williams, 591 So.2d 375, 377 (La.App. 3 Cir. 1991), writs denied,
596 So.2d 211 (La.1992) (alteration in original). A genuine issue is one
as to which reasonable persons could disagree; if reasonable persons
could reach only one conclusion, there is no need for trial on that issue
and summary judgment is appropriate. Id.

Whether a fact is material is determined in light of the relevant
substantive law. Weingartner v. La. IceGators, 02-1181 (La.App. 3 Cir.
4/17/03), 854 So.2d 898, writ denied, 03-1388 (La. 9/19/03), 853 So.2d
645.

Thibodeaux v. Circle K Stores, Inc., 20-540, p. 2 (La.App. 3 Cir. 5/5/21), 318 So.3d

465, 467.

Louisiana Revised Statutes 9:2800.54 sets forth when a manufacturer of a

product is liable for damages caused by its product. It states:

A. The manufacturer of a product shall be liable to a claimant for
damage proximately caused by a characteristic of the product that
renders the product unreasonably dangerous when such damage arose
from a reasonably anticipated use of the product by the claimant or
another person or entity.

B. A product is unreasonably dangerous if and only if:

(1) The product is unreasonably dangerous in construction or
composition as provided in R.S. 9:2800.55;

(2) The product is unreasonably dangerous in design as provided
in R.S. 9:2800.56;

17

(3) The product is unreasonably dangerous because an adequate
warning about the product has not been provided as provided in R.S.
9:2800.57; or

(4) The product is unreasonably dangerous because it does not
conform to an express warranty of the manufacturer about the product
as provided in R.S. 9:2800.58.

C. The characteristic of the product that renders it unreasonably
dangerous under R.S. 9:2800.55 must exist at the time the product left
the control of its manufacturer. The characteristic of the product that
renders it unreasonably dangerous under R.S. 9:2800.56 or 9:2800.57
must exist at the time the product left the control of its manufacturer or
result from a reasonably anticipated alteration or modification of the
product.

D. The claimant has the burden of proving the elements of
Subsections A, B and C of this Section.

Id.
A product is defined in La.R.S. 9:2800.53(3), which states in part:

“Product” means a corporeal movable that is manufactured for
placement into trade or commerce, including a product that forms a
component part of or that is subsequently incorporated into another
product or an immovable.

Component Parts/Finished Product

We note initially that the completed Thunder Roll is composed of more than

one “product” manufactured by different parties. The scaffolding is manufactured

by PERI and the slide parts are manufactured by Neveplast SRL and distributed by

Neveplast USA. As previously noted, Neveplast USA is a manufacturer for

purposes of the statute. Moreover, we find that the trial court did not err in granting

PERI’s motion for summary judgment because the Plaintiffs failed to present any

evidence of a defect in PERI’s scaffolding or that any variation in the scaffolding

design from Neveplast SRL’s template was the cause of Dino’s injuries. More

importantly, though:

[T]he ultimate responsibility for determining whether the end product
or its components will be safe and suitable for the purpose for which it

18

is finally sold lies with the finished product manufacturer. He is held to
a duty of reasonable care in selection of components, which is
something more than mere inspection. His technical knowledge should
be sufficient to enable him to select material, the use of which will
secure a safe finished product. He should use reasonable care to
ascertain the material out of which the other manufacturer’s part is
made and the plan under which it is made, and have sufficient technical
knowledge to form a reasonably accurate judgment as to whether these
are such as to secure a safe finished product. See Restatement of Torts,
2d, Sec. 395. . . . .

Champion v. Panel Era Manuf. Co., 410 So.2d 1230, 1241–42 (La.App. 3 Cir.), writ

denied, 414 So.2d 389 (La.1982).

Neveplast USA is the finished product manufacturer of the TUBBY Jump

(Thunder Roll) slide. It originated the design and completed it by placing the slide

parts atop the scaffolding that PERI manufactured. Neveplast USA also built the

kicker ramp. While other parties were responsible for different aspects of

completing the slide, including PERI, the professional engineer who stamped PERI’s

drawings, and the company who erected the scaffolding, Neveplast USA is

responsible for the completed product, i.e., the Thunder Roll slide that existed at

Epic, under La.R.S. 9:2800.53(3).

The ultimate duty rested with Locher to determine if the slide was safe and fit

for use, and what effect, if any, the design variation had on the safety of the slide.

Without any other evidence that a piece of the scaffolding had a design or

construction defect, summary judgment was properly granted in favor of PERI.

Construction or Composition

A manufacturer can be liable pursuant to La.R.S. 9:2800.55 if its product is

unreasonably dangerous in construction or composition. Louisiana Revised Statutes

9:2800.55 (emphasis added) provides that, “A product is unreasonably dangerous in

construction or composition if, at the time the product left its manufacturer’s control,

19

the product deviated in a material way from the manufacturer’s specifications or

performance standards for the product or from otherwise identical products

manufactured by the same manufacturer.”

“This is a narrow and demanding test” because the plaintiff must show
“that the particular product used by the plaintiff deviated from its
intended design.” Guidry, 206 F.Supp.3d at 1197–98 (emphasis in
original). In other words, the plaintiff must show “what a
manufacturer’s specifications or performance standards are for a
particular product” and “how the product [used by the plaintiff]
materially deviated from those standards so as to render it unreasonably
dangerous.” Lyles v. Medtronic Sofamor Danek, USA, Inc., 871 F.3d
305, 311 (5th Cir. 2017) (citation omitted). “A [plaintiff] must also
show that the alleged defect was the cause-in-fact of his injury, as well
as the ‘most probable cause.’ ” Rhodes, 2019 WL 2162845, at *3
(quoting Wheat v. Pfizer, Inc., 31 F.3d 340, 342 (5th Cir. 1994)).

Fuller v. Eisai Inc., 513 F.Supp.3d 710, 720–21 (E.D. La. 1/15/21) (alterations in

original).

Plaintiffs argue that the “composition of this slide materially deviated from

the specifications of every previous Neveplast slide.” Locher testified that all of the

slides are different as they are built to accommodate the environment in which they

exist. For example, some are built onto mountainsides and some are built on ski

slopes. However, he did state that the Thunder Roll should have been built according

to the Neveplast SRL CAD drawings, and it indisputably was not. Further, he

testified that this was the first “kicker” slide he had personally installed. Plaintiffs’

expert, Edward Pribonic, described the slide and the kicker:

At the lowest point of the slide, the sliding surface then
transitions up a ramp of over 8 [feet] in height.2 Mr Tuminello traveled
up the kicker ramp, beyond its end point and was launched skyward at
30 mph and an angle of approximately 45 [degrees], (Fig. 3A). Upon
his launch from the kicker ramp, the tube, with Mr. Tuminello still
holding tightly to the handles, shot upward another 14 [inches] to 15
[inches] higher, and simultaneously rotated backwards, (Fig. 3B).

2
We note that Pribonic’s report used the sign for inches and feet inversely throughout his
report, but we use the correct measurement in brackets.

20

After reaching the peak height, the tube and Mr. Tuminello began to
fall toward the air bag, and continued to rotate, (Fig. 3C). Ultimately
the tube rotated with Mr. Tuminello’s head directly downward when he
impacted the air bag. Upon impact, Mr. Tuminello sustained multiple
neck and spine injuries.

Plaintiffs make various allegations that a “height increase heightened the risk

of serious injury.” Pribonic’s affidavit mainly finds that “Neveplast’s airbag is

unreasonably dangerous and defective,” and that the Thunder Roll was not properly

tested before being put into use. Pribonic’s report, on the other hand, found that:

cooler temperatures created condensate accumulation on the slide,
reducing friction, thus causing Mr. Tuminello’s tube to travel down
the ramp much faster, and climb higher after exiting the kicker ramp.
The unpredictable rotation of all riders, combined with the higher
speed and higher launch, caused Mr. Tuminello to rotate
approximately 135 [degrees] after launching from the kicker ramp and
impacting the air bag.

Pribonic then stated, “It is my opinion that the subject slide contained

multiple[] dangerous conditions, which were a proximate cause of the injury to Dino

Tuminello.” The report cites numerous failures by Epic to meet industry inspection

standards and other factors, failures relating to the airbag, and finds Neveplast USA

failed to provide Epic with proper maintenance instructions which was a proximate

cause of Tuminello’s injuries. It further states that Neveplast did not comply with

ASTM standards by testing the Tubby Slide. In summary, Pribonic found:

Neveplast should be sufficiently experienced in amusement ride and
device development, construction, and user safety, by virtue of being a
mass marketer of such devices. They should understand the need for
proper engineering, specifications and replacement parts, and comply
with all applicable industry standards and regulatory requirements. It
failed to comply with such safety standards and manufactured and sold
a defective and dangerous product which was a direct cause of the
injuries to Dino Tuminello.

Based on the above, we find genuine issues of fact remain regarding the

appropriate slope and height of the scaffolding, the slide, and the kicker and whether

21

the deviation from the Neveplast SRL template caused Dino’s injuries. Moreover,

due to the complex interrelated products and multiple parties involved at various

steps along the way, we find it premature to dismiss the final product manufacturer,

Neveplast USA, who was ultimately responsible for the Thunder Roll in its

completed state, at this stage of the proceedings.

Design

A second basis for imposing liability against a manufacturer is found in

La.R.S. 9:2800.56, which provides:

A product is unreasonably dangerous in design if, at the time the
product left its manufacturer’s control:

(1) There existed an alternative design for the product that was
capable of preventing the claimant’s damage; and

(2) The likelihood that the product’s design would cause the
claimant’s damage and the gravity of that damage outweighed the
burden on the manufacturer of adopting such alternative design and the
adverse effect, if any, of such alternative design on the utility of the
product. An adequate warning about a product shall be considered in
evaluating the likelihood of damage when the manufacturer has used
reasonable care to provide the adequate warning to users and handlers
of the product.

A product does not automatically suffer from a design defect because someone was

injured:

“The occurrence of an injury does not give rise to the presumption that
the design was unreasonably dangerous.” Rivers v. Remington Arms
Co., No. 17-17124, 2018 WL 746392, at *4 (E.D. La. Feb. 7, 2018)
(Africk, J.) (quoting Robertson v. AstraZeneca Pharms., LP, No. 15-
438, 2015 WL 5823326, at *4 (E.D. La. Oct. 6, 2015) (Barbier, J.)).

Instead, to prove that a product’s design was unreasonably
dangerous—and therefore defectively designed under the LPLA—the
plaintiff must ultimately show that “ ‘[t]here existed an alternative
design for the product capable of preventing the [plaintiff’s] damage’
and that the danger and gravity of that damage outweighed any adverse
effects on the utility of the product and the burden on the manufacturer
of adopting the alternative design.” Flagg, 647 F. 5 at 316 (quoting La.
Stat. § 9:2800.56) (second alteration added); see also Guidry v. Janssen

22

Pharms., Inc., 206 F. Supp. 3d 1187, 1198 (E.D. La. 2016) (Feldman,
J.) (setting forth the same risk-utility test); McCarthy v. Danek Med.,
Inc., 65 F. Supp. 2d 410, 412 (E.D. La. 1999) (Lemelle, J.) (same).

Fuller, 513 F.Supp.3d at 717-18.
Plaintiffs’ argument in brief regarding design defect and the existence of an

alternative design states (footnote omitted):

[T]wo different alternative designs were identified by Neveplast USA
itself. As mentioned, Neveplast USA argued that the Thunder Roll
differed from its other kicker slide designs. In doing so, Neveplast USA
identified the first alternative design: the original Neveplast kicker
slide design. The second alternative design, also a Neveplast slide, had
no kicker at all. Coincidentally, the non-kicker slide sat adjacent to the
Thunder Roll at Epic entertainment. The non-kicker design was already
readily available. Neveplast USA installed between five to thirty slides
annually, yet the Thunder Roll was the first slide ever installed with a
kicker ramp. As a result, two alternative designs exist-both by
Neveplast itself.

Locher testified that the slide and kicker design all originated from Neveplast SRL

and had been used and tested for many years. He said he was unaware of any design

variation until he sent a picture of the completed design to an associate at Neveplast

SRL who noted the change. Locher said that he did not know if the change was

made by PERI, the construction group who erected the scaffolding (4G Structures),

or if it was at Galloway’s instruction. In any case, Locher felt the slope was less

than the original design and that there were no issues as the slide was tested many

times.

The “alternative design,” i.e., the original Neveplast SRL design, may have

been preferable from a safety standpoint. We note, however, that the record is

devoid of any information indicating that to be true; however, due to the complexity

of the issue, we find genuine issues of material fact remain. It is impossible to

determine from the record the extent of the deviation of the scaffolding design from

the initial diagram provided by Neveplast USA to PERI to the as-built design.

23

Questions remain regarding the effect of the deviation from the original Neveplast

SRL design as it related to various parts of the slide.

While the risky nature of this ride should have been evident to anyone who

chose to ride it, an assortment of factors played into the overall safety of the slide,

none of which were fully resolved in the hearing on the motion for summary

judgment.

Inadequate Warning

A manufacturer can be found to be liable if it has failed at providing an
adequate warning under La.R.S. 9:2800.57 which provides:
A. A product is unreasonably dangerous because an adequate
warning about the product has not been provided if, at the time the
product left its manufacturer’s control, the product possessed a
characteristic that may cause damage and the manufacturer failed to use
reasonable care to provide an adequate warning of such characteristic
and its danger to users and handlers of the product.

B. A manufacturer is not required to provide an adequate
warning about his product when:

(1) The product is not dangerous to an extent beyond that which
would be contemplated by the ordinary user or handler of the product,
with the ordinary knowledge common to the community as to the
product's characteristics; or

(2) The user or handler of the product already knows or
reasonably should be expected to know of the characteristic of the
product that may cause damage and the danger of such characteristic.

C. A manufacturer of a product who, after the product has left his
control, acquires knowledge of a characteristic of the product that may
cause damage and the danger of such characteristic, or who would have
acquired such knowledge had he acted as a reasonably prudent
manufacturer, is liable for damage caused by his subsequent failure to
use reasonable care to provide an adequate warning of such
characteristic and its danger to users and handlers of the product.

Adequate warning is defined in La.R.S. 9:2800.53(9) as:

“Adequate warning” means a warning or instruction that would
lead an ordinary reasonable user or handler of a product to contemplate
the danger in using or handling the product and either to decline to use

24

or handle the product or, if possible, to use or handle the product in such
a manner as to avoid the damage for which the claim is made.

In Walker v. Manitowoc Co., Inc., 16-897, 16-898, 18-221, 18-223, p.17

(La.App. 3 Cir. 10/10/18), 259 So.3d 465, 477, a panel of this court stated:

“Whether a particular warning or instruction is adequate is a
question for the trier of fact.” Jack v. Alberto-Culver USA, Inc., 06-
1883, p. 5 (La. 2/22/07), 949 So.2d 1256, 1259. Several factors come
into play in determining the adequacy of the warning, namely: (1) “the
severity of the danger,” (2) the likelihood of successful communication
of the warning to foreseeable consumers, (3) “the intensity and form of
the warning,” and (4) “the cost of improving the strength or mode of
the warning.” Bloxom v. Bloxom, 512 So.2d 839, 844 (La.1987). It
stands to reason that this fact-intensive inquiry is both case-specific and
industry-specific as the duty itself is one of “a reasonably prudent
manufacturer.” See La.R.S. 9:5800.57(C).

There must be a connection between the omitted warning by the manufacturer

and a plaintiff’s damage. Hinson v. Techtronic Indus. Outlets, Inc., 126 F.Supp.3d

747 (W.D. La. 2015), McCarthy v. Danek Med., Inc., 65 F.Supp.2d 410 (E.D. La.

1999). Further, a manufacturer has a duty to anticipate reasonable misuse and warn.

Easton v. Chevron Indus., Inc., 602 So.2d 1032 (La.App. 4 Cir.), writs denied, 604

So.2d 1315,1318 (La.1992). Products that present a serious risk of harm require that

a manufacturer warn in such a way that it is likely to catch a user’s attention. Id.

Plaintiffs argue in brief that, “Warnings of over-rotations and the possible

injuries of such were neither given to Epic nor its riders. Therefore, Mr. Locher’s

instructions cannot satisfy Neveplast’s duty to adequately warn.” Plaintiffs go on to

state: “The record is entirely devoid of any explanation of how to avoid landing

head-first, the incumbent dangers of doing so, or the dangers of using the slide while

wet. So, even if the slide were wet, which is denied, Neveplast USA’s warnings

were still inadequate.”

25

Neveplast USA refers to the warning language in the waiver signed by Dino

indicating that he was aware of the risk of “known and unanticipated risks that could

result in physical or emotional injury including, but not limited to broken bones,

sprained or torn ligaments, paralysis, death, or other bodily injury,” and that “such

risks simply cannot be eliminated without jeopardizing the essential qualities of the

activity.” Undoubtedly, any reasonable adult should realize the inherent dangers of

propelling oneself off of the “kicker” and into the air and subsequently landing on

an airbag.

However, we find numerous genuine issues of fact remain regarding the

possibility of an inadequate warning including whether the standard boilerplate

waiver language was sufficient to warn of this specific risk and whether the failure

to provide a specific warning about over-rotation due to speed in wet and/or dry

conditions to either the handler (Epic) or the user (Dino) created an unreasonable

danger.

The operation of the slide itself is not according to any standard procedure

with “adjustments” being made on instinct based on weather, the size of the riders,

the employees’ “test” rides of the day, and other factors. The kicker can be adjusted

to speed up or slow down a rider’s exit from the Thunder Roll. The risk-utility

analysis is a detailed one that, when combined with the multitude of parties and other

issues presented in this case, was not adequately addressed at the hearing on the

motions for summary judgment. We find that the facts of this case, including a

credibility determination of the Epic employee proposing that a percentage of riders

did not land in an upright position, preclude a finding of no genuine issue of material

facts regarding whether Neveplast USA should have provided warnings relating to

over or under-rotation.

26

Moreover, while Neveplast USA’s paperwork that it provides to buyers of the

TUBBY Jump clearly indicate that the slide is not to be used when wet, a genuine

issue of fact remains as to whether the slide actually was wet. While Epic settled

with Plaintiffs, the issue of whether the slide was wet was not resolved. Additionally,

issues remain as to whether Epic and/or Dino may have acted in a different manner

if it had been warned of the specific danger of over-rotation and the resultant injuries

that could occur.

Express Warranty

Finally, liability can be imposed on a manufacturer pursuant to La.R.S.

9:2800.58, which states:

A product is unreasonably dangerous when it does not conform
to an express warranty made at any time by the manufacturer about the
product if the express warranty has induced the claimant or another
person or entity to use the product and the claimant’s damage was
proximately caused because the express warranty was untrue.

Express warranty is defined in La.R. S 9:2800.53(6):

“Express warranty” means a representation, statement of alleged
fact or promise about a product or its nature, material or workmanship
that represents, affirms or promises that the product or its nature,
material or workmanship possesses specified characteristics or qualities
or will meet a specified level of performance. “Express warranty” does
not mean a general opinion about or general praise of a product. A
sample or model of a product is an express warranty.

To prevail on an express warranty claim, a plaintiff must show:

“(1) the manufacturer made an express warranty regarding the product,
(2) the plaintiff was induced to use the product because of that warranty,
(3) the product failed to conform to that express warranty, and (4) the
plaintiff’s damage was proximately caused because the express
warranty was untrue.” Guidry, 206 F. Supp. 3d at 1199 (quoting Caboni
v. General Motors Corp., 278 F.3d 448, 452 (5th Cir. 2002)).

“An ‘express warranty’ is a representation or statement about a
product that affirms the product possesses specified characteristics or
qualities.” Id. (citing La. Stat. § 9:2800.53(6)). But an express
warranty does not include a “general opinion” or “general praise” of a

27

product. Id. (quoting La. Stat. § 9:2800.53(6)). Put another way, “[t]he
plaintiff must allege the content of the warranty and explain how the
warranty was not true.” Donald, [v. Astrazeneca Pharmaceuticals,
LP,] 2017 WL 1079186, at *4 [E.D. La. 2017].

Fuller, 513 F.Supp.3d at 721-22 (footnotes omitted).

A general claim of an express warranty will not suffice. Id. One must be

exposed to the warranty and induced by it. Id. Plaintiffs’ brief states, “In other

words, Mr. Locher guaranteed the Thunder Roll was safe, to Epic and the Tuminellos,

despite deviations in design.” Plaintiffs’ argument relies on the general assertion

that the existence of the slide in an amusement park implies that the ride is safe and

fit for use by the general public. This allegation is insufficient to satisfy this prong

of the LPLA. Plaintiffs failed to set forth any facts suggesting that Dino was exposed

to an express warranty, much less induced by it. The general allegation that a

product did not perform as it was supposed to is insufficient to meet the requirements

of an express warranty claim. In Reynolds v. Bordelon, 14-2371, p. 11 (La. 6/30/15),

172 So.3d 607, 615, (alteration in original) (emphasis in original) (footnote omitted),

the supreme court stated as much:

As stated by the court of appeal, the plaintiff did not “point to any
specific express warranty given by Nissan, but instead claim[ed]
generally that Nissan had given him the expectation that his vehicle’s
air bag system would mitigate his injuries in a severe automobile
accident, and it did not.” We cannot accept a general alleged warranty
for purposes of an express warranty claim. The LPLA makes it very
clear that in order for the manufacturer to be liable, there must be a
specified stated warranty, i.e., express.

Plaintiffs point to no express warranty given by Neveplast USA and there is

no evidence in the record that Neveplast USA made an express warranty of any kind

to Plaintiffs. Plaintiffs’ claim under the express warranty provision failed. Summary

judgment was appropriately granted under this prong of the LPLA.

28

Comparative Negligence

Neveplast USA argues that Epic bore the sole responsibility for the accident

for failing to heed Neveplast USA’s warning to Epic related to weather conditions.

In brief, Neveplast USA states:

[A]s was the case at the trial court, Plaintiffs’ appeal brief makes the
unsupported conclusory argument that by Neveplast USA appearing at
installation, testing the Neveplast materials at such time, and giving
instructions to Epic on how to properly operate the materials (all of
which are good things for a distributor to do), this was somehow
Neveplast USA’s ‘certification” of safety of the Thunder Roll for
anyone and everyone who ever rode the Thunder Roll in the future.
[emphasis ours]. Meanwhile, in reality, Locher of Neveplast USA’s
actual testimony repeatedly demonstrates that he simply tested the
functioning of the Neveplast materials on the date of installation–i.e. at
a time when the Neveplast instructions for proper use were acutally
being followed.

This argument ignores the principles set forth in Champion, 410 So.2d 1230.

Epic’s comparative negligence must be taken into consideration when assessing fault.

The mere fact, though, that Epic settled with Plaintiffs does not relieve Neveplast

USA, as the manufacturer of the final product, from its responsibility to ensure that

the Thunder Roll, in its final state, was not unreasonably dangerous.

Plaintiffs supplied sufficient evidence via Locher’s own testimony that the

slide deviated from the original Neveplast SRL design schematics, that the slide

lacked a formal testing mechanism as Locher himself testified that “testing”

consisted of him riding the Thunder Roll a couple of dozen times, and that Locher

provided no warning about the danger of overextension such that genuine issues of

material fact remain to be decided at a trial. Whether these actions were a cause-in-

fact of Plaintiffs’ injuries remains to be seen, but in light of our above findings, a

dismissal of Neveplast USA is premature as genuine issues of material fact remain.

29

CONCLUSION

We affirm the trial court’s grant of summary judgment in favor of PERI

Formworks Systems, Inc. We affirm the trial court’s grant of Neveplast USA’s

exception of no cause of action, as Plaintiffs’ sole remedy lies under the LPLA.

Neveplast USA, LC is a manufacturer under the statute. We reverse the trial court’s

grant of summary judgment relating to Plaintiffs’ claims of design defect pursuant

to La.R.S. 9:2800.56, composition or construction defect pursuant to La.R.S.

9:2800.55, and inadequate warning under La.R.S. 9:2800.57. We affirm the trial

court’s grant of summary judgment for Plaintiffs’ express warranty claims under

La.R.S. 9:2800.58. All costs of this appeal are assessed to Neveplast USA, LC.

AFFIRMED IN PART;
REVERSED IN PART.

30